Modern Tire Dealer

JUN 2019

Magazine for the professional tire industry

Issue link: https://mtd.epubxp.com/i/1130839

Contents of this Issue

Navigation

Page 79 of 89

T P M S M T D J u n e 2 0 1 9 78 the vehicle is being operated at a speed of at least 15 mph (24 k/ph). Manual sensor initiation NOTE: In the following procedure, a Kia GDS (Global Diagnostic System) with the TPMS module must be used. 1) Condition — ignition ON and engine OFF. 2) Holding the TPMS module within 3 inches (76 mm) of the sensor valve, read each tire pressure sensor ID in the following order: front le, front right, rear le, then rear right. 3) Press the ENTER button as each tire is illuminated on the screen. 4) Press the WRITE button aer reading all of the sensor IDs. 5) Connect the GDS to the Data Link Connector (DLC) located under the le side of the instrument panel. Register the four sensor IDs to the receiver (see Figures 1 and 2). e TPMS receiver will complete the learn procedure of the new sensor aer the vehicle is driven up to 20 minutes at speeds over 15 mph (25 km/h). 6) Modify any sensor ID and press [OK]. A U T O M O T I V E I N T E L L I G E N C E ( 855 ) 288-3587 autel.com / maxitpms.com Register and update tools for latest coverage © 2018 Autel Intelligent Technology Inc. TS508 99 % VEHICLE COVERAGE PROGRAMMABLE UNIVERSAL TPMS Figure 1: Registering the tire pressure sensor (1 of 2). Figure 2: Registering the tire pressure sensor (2 of 2).

Articles in this issue

Links on this page

Archives of this issue

view archives of Modern Tire Dealer - JUN 2019